SENYDA(HK)Technology Limited
100% Origional Cisco Products In China
Add to Cart
Cisco Switch Power Supply Module PWR-C45-6000ACV Catalyst 4500 Series
Product Information
PWR-C45-6000ACV is a Cisco Catalyst Switch 4500 Series Switch Power Supply, delivering 6000W AC power (Data and PoE) for Cisco 4500 switches.
Notice that PWR-C45-6000ACV= is similar with PWR-C45-6000ACV, except that PWR-C45-6000ACV= is a spare one.
| Product Code | PWR-C45-6000ACV= |
| Manufacturer | Cisco System Inc. |
| Product Type | Power Supply Module |
| Compatible product | Cisco Catalyst 4500-E Series Switches and classic chassis |
| Power Input | 2800W Data and 4200W PoE Power |
| Auto-Sensing | 110V (15A) / 220V (20A) |
| Redundancy | Dual input power supply for additional redundancy |
| Rated MTBF (Hours) | 341,356 |
More Details
The 6000 W AC-input power supply (PWR-C45-6000ACV), shown in Figure A-1, is supported in following Catalyst 4500 E-series switch chassis:
Figure A-1 6000 W Dual-Input AC Power Supply
| 1 | AC-input 2 receptacle | 4 | AC-input 1 receptacle |
| 2 | AC-input 2 on switch | 5 | Captive screws |
| 3 | AC-input 1 on switch | 6 | Remote power cycling terminal |
Table below shows 6000 W AC-Input Power Supply Specifications
| AC-input type | Autoranging inputs with power factor correction Note : Power factor correction is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. |
| AC-input voltage | Low-line (120 VAC nominal)—85 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max) |
| AC-input current | 12 A (max) @ 120 VAC (for each input) 16 A (max) @ 230 VAC (for each input) |
| AC-input frequency | 50/60 Hz (nominal) (±3% for full range) |
| Power supply output capacity | 6000 W maximum |
| Output holdup time | 20 ms minimum |
| kVA rating5 | 6.8 kVA (power factor = 0.99) |
| Heat dissipation | 2,720 BTUs/hr (approx.) |
| Minimum software requirement | Cisco IOS Release 12.2(52)SG |
| Power over Ethernet | Supported, up to 4800 W |